 |
 |
| Products By Application |
 Slip Resistance |
| General Cleaning |
| Polish & Seal |
| Residential |
| Commercial |
| All Products |
| Get-A-Grip |
| Stain-Out |
| Fiber-Clean |
| PolishBright |
| Squirt & Scrub |
| Ultra-Clean |
| Clean-Sweep |
| Installation Kit |
| 3M Scotch-Brite Pads |
| Power Pad Handle |
| Coffee Mug |
| |
| |
|
 |
Get-A-Grip
™
Our exclusive formula eliminates the fear of falling. This non-slip porcelain tub/shower treatment removes stains and discoloration. It makes bathtubs safer in just 10 minutes offering great protection for the entire family. The product is simple to apply and be used on quarry, ceramic, cement, terrazzo, and all stone surfaces.
 |
Get-A-Grip Kit
Kit includes
- 3oz Get-A-Grip
- 3M Scotch-Brite Pads
- Power Pad Handle
|
| |
|
 |
| (
3 oz
) |
$15.99
|
|
| (
1 qt
) |
$95.00
|
|
Directions
Get-A-Grip™ is designed to make the bathtub less slippery. Wearing rubber gloves & using 3M scrub pad, starting at the opposite end of the drain, apply by pouring entire bottle of Get-A-Grip™ into the bathtub. Spread using 3M pad over any area you can stand on base of bathtub (Do not apply to sides of bathtub). If bottom of bathtub is stained, scrub until stains are removed. After 10 minutes, using the showerhead, rinse bathtub & 3M pad thoroughly. Dispose of 3M pad and Get-A-Grip™ bottle (DO NOT USE 3M PAD OR BOTTLE AGAIN). Do not drip liquid from 3M pad while disposing of pad. Your installation is complete.
Recommended Usage
-
Apply Get-A-Grip™ liquid to bathtub bottom, shower bottom or floor with a lambswool applicator or sponge.
-
Keep treated area wet during entire time of application. Treatment time may vary from 1 to 30 minutes.
-
After desired tread is acquired, rinse thoroughly with water. If in area where people walk barefooted, neutralize area for 2 minutes with a mixture of 1 tablespoon of baking soda to 16oz of water (or) 1 cup of baking soda to 4 gallons of water for large areas up to 500 square feet.
|
|
 |
| |
 |
|
|
|
 |
